Re: A couple of questions on using energy
Originally Posted by
D.B.
First question: How does one preform magnetizing/charging/whatever you want to call it? Is it as simple as pumping the desired energy type with body awareness into the object through the hands or do you have to focus your mind on an image/visualisation?
For a simple beginning pick something that you can hold in a closed fist. A small quartz crystal is a fine choice as it holds energy well.
CHARGING: Place the object in your closed hand so that it touches the center of your palm somewhere. Then either pump energy into it or focus on making it 'glow'. The object may get warm, if it does then stop. No more than 5 minutes is necessary so don't drown the thing. If you experiment with different objects, you will find that some hold energy longer than others.
MAGNETIZING: This is similar to charging but the energy is applied by stroking the object repeatedly in the same direction (kind of like brushing hair). Hold the object in the cupped palm one hand. With the other hand stroke repeatedly in the same direction from one end to the other while doing the same pumping or focus as above. Stroking can be done with any part of the front of the hand (finger tips usually easiest). For a more thorough job turn the object over. Be careful to stroke from the same start and stop points just on the opposing side. If you stroke in a different orientation, you will undo your previous work. For you junior scientists out there, the stroking part of this is identical to magnetizing a nail with a fixed magnet. Rather than use the fixed magnet, you are using your energy instead.
Technical notes:
-its easier to magnetize an object with grain along that grain (crystal, wood, etc)
-its easier to magnetize an oblong object along the long axis
SEALING: In order to make the energy stay longer, you can seal the object after charging/magnetizing it. This will make the energy stay longer, but also make it harder to drain quickly. To do this hold the object in the hand not used for charging. Repeat the same charging or focusing as above but this time, use your finger tips to brush the surface of the object lightly like as if your were coating it with oil (do not use actual oil unless you know what you are doing). The whole surface should be sealed for best results. A single coat is sufficient. For a magnetized object try to brush in the same direction as before as much as possible.
Sin nada (Nothing is impossible)
Bookmarks