Working Analogy.... All negative energies and entities that trouble humans are bound to the surface of the earth in a thin energy layer that is barely understood. Negative entities can be likened to EM entities, in that they live in an EM dimension. They interact with humans on the EM level, with the EM aspects of the human body and mind. To an EM entity, a grounded/earthed area would appear as a potential well, as a chasm that it cannot cross. If forced into an EM deep grounding situation, the energies of negs are grounded and the neg's presence close to the physical dimension is demanfested. If this concerns a ghost or x human earthbound spirit, the same applies and the spirit will then be forced to move on to the next level of existence to begin processing its past life. Once this occurs, it would be difficult if not impossible to return to close to the earth plane. So in this sense, grounding an earthbound spirit is helping it move on into the light, so to speak.
Using the above working analogy, the value of grounding and grounding products is obvious. Could it be this simple...I think so.
A power outlet contains a deep grounding/earthing point that has a wire that is connected to a steel spike driven several feet into the earth. This makes it convenient to connect to with grounding devices.
Metal plumbing fixtures and pipes also provide deep grounding. Metal spikes can be driven into the earth to provide deep grounding outlets that are independent of power outlet grounding or metal plumbing.
All grounding like this, whether a power outlet grounding wire or plumbing is used, are safe to use. The laws of physics concerning electricity say that electricity will always seek the most direct path to ground. This is never 'through' anything and there is no spill over into devices connected to the earthing cable. If in doubt, use plumbing water pipes. A simple alligator clip and cable will suffice to establish an effective grounding.
Deep grounding is different from just touching the earth. This is why an electrical grounding must be driven several feet into the earth to be effective. Simply standing on bare earth is not enough for effective EM or electrical grounding.
Bookmarks