This is for energy blocks that occur on or along energy channels (as per Chinese accupuncture meridians). This needs to be done by someone else not the person being with the block. The person doing the work needs the ability to find the energy channels. Random running of energy is NOT recommended. Place the tip of each index finger where the end of the energy channel exits the skin. Attempt to run energy through the channel by starting slowly and building up. A blast of energy can cause burns to either person so take your time. When a sufficient energy 'pressure' is built the blockage will be breeched. Do not increase the flow more. Usually this will dissolve the block, if so continue running the energy for another miunte or two then ramp down. Some blocks are stubborn and the energy will breech around rather than through the block. If this occurs, start ramping down right away. There should be a noticible energy flow when the breech occurs. The energy 'pressure' will drop immedidately if the block has been dissolved. In the case of complete failure, repeated attemps are not generally helpful without other supplementy work. In any case allow a day or so for recovery between sessions.
Advanced version (requiring a third person) blocked (all??) energy channels always have a third location where the energy exits the skin. After the first energy person places their fingers but before ramping up, have them gently pulse energy into the channel. This is required to identify the correct exit point as there many energy exits on the body. When (if) the third point is found that person should put the tip of their index finger on it and inject energy in synch with the first energy person.
Sin nada (Nothing is impossible)
Bookmarks